Stop guessing. Start shorting. Good luck. Have a different Dell board like the 0Y2MRG or 0KWVT8? The pinout is usually identical, but always verify the ground plane with a multimeter before connecting.
On the Dell MH61R, the power switch circuit is on and Pin 7 (GND) . Dell Mih61r Mb Front Panel Pinout
On a standard Intel motherboard, the power switch pins are usually and Pin 8 (Ground) . On the Dell MH61R, Pin 8 is NC (No Connection) . Stop guessing
If you are reading this, you have likely just experienced a specific flavor of PC building frustration. Have a different Dell board like the 0Y2MRG or 0KWVT8
| Pin Number | Signal | Description | Standard Intel Equivalent | | :--- | :--- | :--- | :--- | | 1 | HDD LED + | Hard Drive Activity (Anode) | Pin 1 | | 2 | HDD LED - | Hard Drive Activity (Cathode) | Pin 3 | | 3 | GND | Ground | Pin 2 or 4 | | 4 | PWR LED + | Power LED (Anode - Green) | Pin 2 (Usually) | | 5 | PWR LED - | Power LED (Cathode) | Pin 4 | | 6 | PWR_SW | | Pin 6 (Usually) | | 7 | GND | Ground for Power Button | Pin 8 (Usually) | | 8 | NC | Not Connected (Key pin on Intel) | Pin 5 (Missing on Intel) | | 9 | +5V (Standby) | 5V always on | N/A | | 10 | GND | Aux Ground | N/A |
Do not trust the color of the wires on a Dell OEM case. Dell changes wire colors between revisions. You must go by pin position, not wire color. The Actual MH61R Pinout (Verified) Here is the pinout looking at the motherboard header with the PCIe slots facing down (bottom edge of the board towards you).