Deskproto 7.0 Info
While full simultaneous 4-axis machining was reserved for the "Expert" edition, DeskProto 7.0 introduced incredibly accessible Indexed 4-axis machining . You can machine a part, rotate the rotary axis by a set degree, and machine again. For making chess pieces or fluted columns, this is a game changer.
The standout feature in this version cycle is the "3D Engraving" strategy. Unlike standard v-carving (which uses a V-bit to vary depth), DeskProto 7.0 allows you to use a ball-nose end mill to follow a 3D surface texture. This is incredible for making lithophanes or detailed molds.
It isn't the prettiest software on the block, but like a cast iron skillet or a dial caliper,
Enter .
If you have a 3D file (STL, DXF, 3DM), DeskProto 7.0 acts as the translator. You tell it what machine you have (Shapeoko, Stepcraft, or a homemade MPCNC), what bit you are using, and how smooth you want the finish. It spits out the G-code. That’s it. No need to understand cutter compensation or arc center commands. If you are looking at used licenses or an older computer running your CNC router, here is what DeskProto 7.0 does exceptionally well: |
|
While full simultaneous 4-axis machining was reserved for the "Expert" edition, DeskProto 7.0 introduced incredibly accessible Indexed 4-axis machining . You can machine a part, rotate the rotary axis by a set degree, and machine again. For making chess pieces or fluted columns, this is a game changer.
The standout feature in this version cycle is the "3D Engraving" strategy. Unlike standard v-carving (which uses a V-bit to vary depth), DeskProto 7.0 allows you to use a ball-nose end mill to follow a 3D surface texture. This is incredible for making lithophanes or detailed molds.
It isn't the prettiest software on the block, but like a cast iron skillet or a dial caliper,
Enter .
If you have a 3D file (STL, DXF, 3DM), DeskProto 7.0 acts as the translator. You tell it what machine you have (Shapeoko, Stepcraft, or a homemade MPCNC), what bit you are using, and how smooth you want the finish. It spits out the G-code. That’s it. No need to understand cutter compensation or arc center commands. If you are looking at used licenses or an older computer running your CNC router, here is what DeskProto 7.0 does exceptionally well: |
|
|
|
|
|
|
