CFE> nvram set flash_lock=0 CFE> nvram commit CFE> reboot If you can share you’re using (STM32, ESP32, router model, etc.), I can give you the exact unlock command.
It sounds like you’re encountering an error message from a device, software tool, or embedded system (possibly a router, network switch, microcontroller programmer, or industrial equipment).
sf probe sf protect unlock <addr> <len> Connect via JTAG/SWD and run: CFE> nvram set flash_lock=0 CFE> nvram commit CFE>
Failed - Remote 39: Flashing lock flag is locked. Please unlock it first. Fix in CFE:
mw 0x<address> 0x12345678 # unlock command (address varies) protect off all erase <start> <end> Or (for SPI/NOR flash): Please unlock it first
STM32_Programmer_CLI -c port=SWD -ob Unlock Or from the GUI: go to → disable read/write protection. Option B – Unlock from bootloader/U-Boot In U-Boot (common on routers/dev boards):
flash protect 0 0 last off Or:
stm32f1x unlock 0 During boot, interrupt into CFE and run: