Power Engineering 3b1 Exam Questions -

| Topic | Approx. % | |-------|-----------| | Boiler design, types, and construction | 20% | | Boiler fittings and accessories | 15% | | Combustion and fuel systems | 15% | | Thermodynamics (steam properties, cycles) | 15% | | Materials and welding | 10% | | Water treatment | 10% | | Draft systems and fans | 8% | | Safety and ASME/CSA codes | 7% | Question 1 – Boiler Design (Metallurgy) A firetube boiler shell is subject to internal pressure. The maximum allowable stress for the shell material at 200°C is 120 MPa. The shell inside diameter is 1.5 m, and the required thickness is 18 mm. Calculate the maximum allowable working pressure (MAWP) using the thin-shell formula for a cylinder.

C) 425°C – 550°C (above 400°C for carbon steel) Question 8 – Boiler Operation (Hydrostatic Test) After a major boiler repair, you perform a hydrostatic test. The test pressure for a power boiler per ASME Section I should be: A) 1.25 × MAWP B) 1.5 × MAWP C) 2.0 × MAWP D) MAWP + 100 psi power engineering 3b1 exam questions

A) Efficiency increases (higher mean temperature of heat addition) Question 5 – Water Treatment (Phosphate Treatment) What is the main purpose of coordinated phosphate/pH control in a high-pressure boiler? A) Prevent silica carryover B) Prevent caustic gouging and acid phosphate corrosion C) Remove dissolved oxygen D) Reduce total dissolved solids | Topic | Approx